Spectrum 625 X-TREME 20-ft. XT40 Quick Connect
Description
Spectrum® 625 X-TREME™ 20-ft. XT40 Quick Connect
907579001
Powerful 40 amps cuts up to 5/8 inch mild steel and weighs only 21 lbs. X-CASE provides ultimate protection during transport and storage.
WHAT'S INCLUDED
- XT40 hand-held torch with 20-ft. (6.1 m) cable. Torches include a complete set of 40 A consumables
- Heavy-duty work clamp and flexible cable with quick connect
- X-CASE™ provides protection during transport and storage
- 12-ft. (3.7 m) power cord with 240 V L6-30P twist lock plug for MVP™ adapters
- MVP™ adapters with 240 V, 50A (6-50P) plug and 120 V, 15 A (5-15P) plug
- Shoulder strap
- Consumables box with 2 electrodes, 2 tips (40 A), 1 tip (30 A), drag shield (30 A), deflector, and air fitting
Rated Cutting Capacity
The rated cutting capacity is based on traveling approximately 15 inches per minute to achieve a steady, precise cut. This is the key rating that should meet or exceed your typical cutting thickness requirements. Learn More
XT40 Torch
Ergonomic handle with unique no-slip grip, thumb guide and finger contours help prevent operator fatigue while the flexible cable makes maneuvering easy. Now comes with the new ultra flexible Quick Connect work lead with smaller heavy duty clamp. Learn More
Auto-Line™ and MVP™ (multi-voltage plug) Adapters
Auto-Line provides state-of-the-art flexibility to the end user. The Auto-Line circuitry automatically connects to 120–240 VAC, single-phase power, 50/60 Hz, without removing the covers to relink the power source. Miller’s multi-voltage plug (MVP™) Adapters allow connection to 120 or 240 V receptacles without tools—choose the adapter that fits the receptacle and connect it to the power cord. Learn More
Auto-Refire™
Auto-Refire™ Technology provides ultimate customer convenience by automatically controlling the pilot arc when cutting expanded metal or multiple pieces of metal. The pilot arc will switch in and out as fast as needed when cutting expanded metal and provides maximum power for cutting thicker metal—all automatically! No need for manual re-triggering which reduces user hand fatigue. Learn More
Automatic Air Regulation
The unit automatically compensates for input pressure variation to provide constant recommended torch pressure for optimum cutting and gouging performance.
Portability
Portable in the shop or at the job site—at 21 pounds the shoulder strap allows the end user to easily move from location to location. Learn More
Protective X-CASE™
Miller's X-CASE provides ultimate protection during transport and storage. Additional space is ideal for MVP Plug Adapters, consumable box, as well as gloves, eye protection, etc. Learn More
CNC/Automation Cutting Capable
Factory ready CNC/Automation models are available in long or short body torches as well as retrofit kits to convert hand held machines to be capable of CNC/Automation cutting.
Specifications
UNSPSC Code
7159600000
Brand
Miller Electric
Category
WELDERS & PLASMA CUTTERS
selection not available, try a different combination
selection not available, try a different combination
CAD 3,399.99
Compare
Spectrum 625 X-TREME 20-ft. XT40 Quick Connect
Description
Spectrum® 625 X-TREME™ 20-ft. XT40 Quick Connect
907579001
Powerful 40 amps cuts up to 5/8 inch mild steel and weighs only 21 lbs. X-CASE provides ultimate protection during transport and storage.
WHAT'S INCLUDED
- XT40 hand-held torch with 20-ft. (6.1 m) cable. Torches include a complete set of 40 A consumables
- Heavy-duty work clamp and flexible cable with quick connect
- X-CASE™ provides protection during transport and storage
- 12-ft. (3.7 m) power cord with 240 V L6-30P twist lock plug for MVP™ adapters
- MVP™ adapters with 240 V, 50A (6-50P) plug and 120 V, 15 A (5-15P) plug
- Shoulder strap
- Consumables box with 2 electrodes, 2 tips (40 A), 1 tip (30 A), drag shield (30 A), deflector, and air fitting
Rated Cutting Capacity
The rated cutting capacity is based on traveling approximately 15 inches per minute to achieve a steady, precise cut. This is the key rating that should meet or exceed your typical cutting thickness requirements. Learn More
XT40 Torch
Ergonomic handle with unique no-slip grip, thumb guide and finger contours help prevent operator fatigue while the flexible cable makes maneuvering easy. Now comes with the new ultra flexible Quick Connect work lead with smaller heavy duty clamp. Learn More
Auto-Line™ and MVP™ (multi-voltage plug) Adapters
Auto-Line provides state-of-the-art flexibility to the end user. The Auto-Line circuitry automatically connects to 120–240 VAC, single-phase power, 50/60 Hz, without removing the covers to relink the power source. Miller’s multi-voltage plug (MVP™) Adapters allow connection to 120 or 240 V receptacles without tools—choose the adapter that fits the receptacle and connect it to the power cord. Learn More
Auto-Refire™
Auto-Refire™ Technology provides ultimate customer convenience by automatically controlling the pilot arc when cutting expanded metal or multiple pieces of metal. The pilot arc will switch in and out as fast as needed when cutting expanded metal and provides maximum power for cutting thicker metal—all automatically! No need for manual re-triggering which reduces user hand fatigue. Learn More
Automatic Air Regulation
The unit automatically compensates for input pressure variation to provide constant recommended torch pressure for optimum cutting and gouging performance.
Portability
Portable in the shop or at the job site—at 21 pounds the shoulder strap allows the end user to easily move from location to location. Learn More
Protective X-CASE™
Miller's X-CASE provides ultimate protection during transport and storage. Additional space is ideal for MVP Plug Adapters, consumable box, as well as gloves, eye protection, etc. Learn More
CNC/Automation Cutting Capable
Factory ready CNC/Automation models are available in long or short body torches as well as retrofit kits to convert hand held machines to be capable of CNC/Automation cutting.
